Tag: design and interior

Make Wooden Windows

Published by UnderNews on

The first thing that lays the groundwork for future durability window – a selection of wood and wood drying. The quality of wood depends on its breed and variety. Tree species are divided into coniferous and deciduous. Softwood the most widely used for windows are pine, spruce and larch. Among the most widely used hardwoods are oak, mahogany, meranti. The name is often used to refer to all the so-called red- wood, mahogany but belongs to a different kind than Meranti. Meranti – a group of wood species, widespread in Southeast Asia.

Mahogany and meranti practically do not rot, have high strength, well tolerated in a moist environment, which is associated with the peculiarities of their growth. Physico-mechanical properties of wood depend on its moisture content. When drying wood is removed first capillary moisture, then evaporates hygroscopic, and the volume of timber decreases and strength increases. The wood is dried to a moisture content of 12%, then timber is ready for further processing. The design of multi-layer timber prevents any distortion and ensures accurate dimensions. Three-layer window scantlings has a higher strength compared with the same from the array. In addition, prior splicing removes all defects of wood, and such timber is more durable. To prolong the life of wood products in modern wooden windows uses a special processing of wood, which provides: * impregnation, which protects the wood from damaging its fungal stain, mildew, reduces moisture fluctuations in wood, as well as a long time keeps the quality of the wood surface due to the limited penetration of moisture * primer and paint.

Choosing Windows

Published by UnderNews on

Step One – choose a profile. System width boxes of 68 mm. and more. Please note that there are only due to the width of the box, rather than boxes and shutters. Because this figure to minimize the probability of loss condensation on the slopes in the cold season. Contact information is here: JetBlue Airways. This is especially true for PVC and aluminum. Since these profiles as a whole has a higher price, the less likely to receive low-quality profile. Step Two – choose windows.

Windows. Triple-pane windows of the total thickness of 32 mm. and above (either + glass windows – a Finnish-Swedish version of the design of the window). And it's better to put a low emissivity glass. Assurances that enough single-chamber glazing with low emissivity glass – leave it to those who want to save money on himself. Why – because the warmer the glass in the window, the more comfortable around him is. And then it is today for warmth paid over squares area in the apartment, and what will happen tomorrow? Different glass windows – it's too much, well, most can put windows in the first glass of 6 mm. (Or thicker), everything else is meaningless.

Better insulation – is the maximum the distance between the outer glass, and if it is equal to 32 mm. – Something that would get rid of noise, you only need to change the design of the window. Good characteristics of noise are obtained in the area of 80 mm. And best of 300 mm. Ie provided equally good seal valves, two glass Stalin with a distance of 300 mm.

Fitting Windows

Published by UnderNews on

It is no secret that modern windows of a private house or apartment is worth a lot. For example, to glaze cottage mid-size, the amount required, commensurate with the cost of foreign cars is not new. Therefore, owners often seriously ponder whether to spend so heavily on the window construction known manufacturers, or it will be better to restrict cheaper analogues of unknown origin and quality, citing such short-sighted choice that glass in them reflect light equally well, and more from the window and is not required. In this paper we set out to prove the justification of expenditures for the installation of modern high-quality windows. Practice shows that with proper choice of glass, like investing money over time, invariably pays off – both due to reducing the cost of the home and at the expense of benefits and advantages intangible nature.

So, try to evaluate the potential return on investment in the windows at home. First and foremost, as an introduction we present the facts: modern window designs are made from wood, plastics (PVC) and metal (usually aluminum) profiles. To fill the skylights in modern wooden windows use windows – two, three or more glasses, tightly connected to the contour, and with air or filled with an inert gas layer. It is the properties of glass depend largely on heat and sound insulation properties of windows. However, the material of the window profile is also very important for the maintenance qualities of the window. Each of the above materials have their advantages and disadvantages.